| Description |
DS-1510 |
DS-1520 |
DS-1530 |
| Acquisition |
Max. Sample Rate |
Max. 1GS/s |
| Max. Equivalent time Sampling
Rate |
100GS/s |
| Record Length |
Max 200kpts/CH |
| Peak Detect |
5ns Peak Detection |
| Vertical |
Frequency bandwidth (-3dB) |
DC to100MHz (DC to 60MHz at 1mV/div, 2mV/div) |
DC to 200MHz (DC to 60MHz at 1mV/div, 2mV/div) |
DC to 300MHz (DC to 60MHz at 1mV/div, 2mV/div) |
| Calculated Rise Time |
3.5ns |
1.5ns |
1.667ns |
| Low frequency limit in AC Coupling |
10Hz (-3dB) |
| Bandwidth Limit |
DC to 20MHz |
| Single Shot Bandwidth |
100MHz Maximum |
200MHz Maximum |
250MHz Maximum |
| Input Channel |
CH1, CH2 |
| Volts/Div |
1mV/div to 5V/div, 12 steps |
| Offset Range |
±20div (±10div at 1mV/div) |
| Input Impedance |
1MOhms ±1% in parallel with 15pF
±2pF |
| Dynamic Range |
More than 10div at maximum bandwidth |
| Max. Input volt |
1MOhms : 400Vpk (peak AC ≤ 1kHz
+ DC) 50Ohms : 5Vrms |
| Gain Accuracy |
±3% of Full Scale (±6% at 1mV/div) |
| Input Coupling |
1MOhms : AC, DC, GND 50Ohms :
DC |
| Input Coupling Offset |
±0.2div at 5mV/div to 5V/div
±0.3div at 2mV/div, ±0.6div at 1mV/div |
| Attenuator(Step) Balance |
±0.2div at 5mV/div to 5V/div
±0.3div at 2mV/div, ±0.6div at 1mV/div |
| Channel to Channel Isolation |
Less than 0.2div at 100MHz |
| Horizontal |
Time/div |
Equivalent : 0.1us/div ~ 1ns/div |
| Real time : 1000s/div ~ 1ns/div |
| Roll mode : 1000s/div ~ 0.5s/div |
| PreTrigger |
Max. 19div |
| Magnification |
Zoom In/Out |
| Hold off |
Max. 40s |
| Trigger |
Mode |
AUTO, NORMAL, SINGLE |
| Coupling |
DC, AC, LF-Rejection, HF-Rejection
AC cutoff frequency : 10Hz (-3dB) approx. LF/HF cutoff Frequency
: 43kHz (-3dB) approx. |
| Type |
Edge, TV, Pulse Width, and UART
Trigger |
| Slope |
Rising, Falling |
| Level |
INT : ±20div (±10div at 1mV/div) |
| EXT : ±3V |
| Source |
CH1, CH2, EXT, LINE |
| Alternating |
Enable (Ch1, Ch2) |
| EXT |
Input Impedance : 1MOhms ±1%
in parallel with 15pF ±2pF |
| Maximum Input : 400Vpk (peak
AC ≤ 1kHz + DC) |
| Sensitivity |
| TRIGGER |
Frequency |
SENSITIVITY |
| 5mV ~ 5V/div |
2mV(1mV)/div |
| Internal (CH1, CH2) |
DC ~ 10MHz |
0.5div |
0.5(1)div |
| 10MHz ~ 200MHz |
1div |
1(2)div at 10MHz ~ 60MHz |
| 200MHz ~ 300MHz |
1.5div |
| External |
DC ~ 100MHz |
0.2 Vp-p |
| 100MHz ~ 300MHz |
0.5 Vp-p |
|
| XY |
Bandwidth |
Max Bandwidth |
| Phase error at 500kHz |
1.8 Degrees |
| Display |
|
7 Color TFT LCD |
| Math |
Arithmetic |
Add, Subtract, Multiply, Divide, Sgrt, Sguare,
absolute |
| FFT |
Rectangular, Flattop, Hanning,
Blackman, Hamming (2Channel) |
| Pass-Fail |
Editable Waveform Zone (support,
USB Memory) |
| Menu |
Display |
Type : Dots, Vectors Format : X-Y, Y-T GRID :
Full, Cross, Board |
| Save/Recall |
Internal : 10 Setup, 10 Waveform
External : No Limit |
| Utility |
Self Calibration, Multiligual,
Self Calibration, RTC (Real Time Clock), Multilingual, Upgrade Support |
| Cursor |
Type : Time, Frequency, Voltage
Source : Ch1, Ch2 |
| Measure |
Pk-Pk, RMS, Mean, Frequency,
Rising time, Failing time, Period, Positive width, Negative width, Duty,
+Over shoot, -Over shoot, High, Low, Max, Min, Amplitude... |
| Wide |
12Time/Div~18Time/Div |
| Hot-Key |
AUTO SET |
Vertical, Horizontal & Trigger setting |
| RUN/STOP |
Waveform hold |
| SINGLE |
Enable |
| HARDCOPY |
Graphic File formats : BMP (sopport
USB Memory) |
| INTERFACE |
Default |
RS-232cX1, USB(HostX1, ClientX1) |
| Option |
USB(HostX1), Ethernet(IEEE 802.3)X1 |
| POWER |
Source Voltage & Frequency |
90~250VAC at 48~440Hz, Free Voltage |
| Power Consumption |
Max. 60W |
| PHYSICAL DIMENSIONS |
WEIGHT |
3Kg |
| SIZE |
360x130x200(mm) |
| Environment & SAFETY |
EMC |
EMC Directive 89/33 EEC:EN 61326-1 |
| SAFETY |
Low voltage Directive 73/23/EEC:EN
61010-1, UL3111-1 |
| AMBIENT Condition |
Rated accuracy : +10°C to +35°C;
Operating range : 0°C to +40°C |
| Humidity |
Rated accuracy : 45 ~ 85% RH;
Operating range : 35 ~ 85% RH |